Pre-requisites
1. Install USB Drivers for Galaxy
Note 2 on the computer.
2. Enable USB Debugging Mode on the phone. Go to
Settings >>More>> About Device. Tap on "Build Number" several times till the
message shows "You are now a Developer". Then enable USB debugging by
navigating to Settings >>More>> Developer Options.
3. Make a backup of all your important data before
following the guide.
4. Ensure the battery of the phone is charged more
than 80 %.
Samsung Galaxy Note 2 Android 4.3 Root
3.
Now, Switch off your
phone and boot Galaxy Note 2 N7105 into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
together (long press until the boot screen appear), now press Volume Up key
to proceed to Download Mode.
4.
Run the Odin3
v3.09.exe file as an administrator (Right click on
the .exe file and click on Run as administrator)
- Now connect your Galaxy
Note 2 N7105 to your computer via USB cable
- In Odin3 screen, you should see
a COM Port number like “0:[COM7]” at ID:COM section
and “Added!” text at the message box. This means your
device has been detected by Odin3.
- Make sure that, only the “Auto
Reboot” and “F. Reset Time” options are checked.
- Now, click on the PDA button
and select the CF-Auto-Root-t0lte-t0ltexx-gtn7105.tar.md5 file.
- Finally, click on the Start button
to begin the rooting process, wait few moments.
- Once completed, you would
see “PASS!” message in ID:COM port having green background
- Your phone should automatically
reboot after completion
- You can now disconnect your phone
from computer
- If you see message Error “SuperSU” , go
to play Store>> update SuperSu.
- To verify your device is rooted or not, you can download
and run the Root Checker App from Google Play Store.
- Finish
Myanmar Zawgyi font install
1) Connect your phone to PC by using USB cable.
3)
Right click on "smartzawgyi4.3advanced" and
Extract it.
4) Right click on “Installer” and Run as administrator.
5) If you see a message Super User Request on your phone,
click on “Grant”
6) Your phone will Auto Reboot.
7) After reboot your phone, you can see Myanmar
font on your phone.
Warning: Before install Myanmar Zawgyi font, Make sure your Window system is 32 bit.